Xrouter - XR32

Page 1 of 5 1, 2, 3, 4, 5  Next

View previous topic View next topic Go down

Xrouter - XR32

Post by Admin on Wed Dec 02, 2015 5:54 pm

Use this page for Xrouter or XR32 (Windows & Linux)
Click on Quick Reply (the little white box below this message)to get started with your  question or answer
avatar
Admin
Admin

Posts : 15
Join date : 2015-12-02

View user profile http://www.g7vja.co.uk

Back to top Go down

Re: Xrouter - XR32

Post by g4mki on Mon Dec 28, 2015 10:03 am

Kenny,
The older, though not the original, version of my IPROUTE.SYS, probably including the NIC MAC addresses for the defunct PC.

# IPROUTE.SYS
#
# ROUTE <default> <portnum> [<gateway> [<mode>] ]
#===================================================
;IP ROUTE DEFAULT  0 * w
; Try all unknown routes via SmoothWall
;
IP Route default 12 192.168.1.254 d                          ; G4MKI
IP Route default 1 44.131.255.164 d      
IP route add 192.168.1.254/32 ether c8:91:f9:2d:4b:6f       ;ROUTER
# ROUTE   <add>  <host/bits>   <gateway>    <portnum>  <d|v|n|e>
#===============================================================================
;
IP route add 192.168.1.254/32   192.168.1.254 12 d
IP route add 44.0.0.0/8  44.131.244.1 22 d
IP route add 44.131.244.1/32  44.131.244.1 22 d              ;gb7cip-5
IP route add 44.131.244.1/32 22 d
;IP route add 44.131.244.17/32  44.131.244.17 23 d
;IP route add 44.131.244.1/32  24 d
;IP route add 44.131.210.2/32  44.131.210.2 12 d             ;g7vja-5
;
;IP route add 44.131.161.95/32  44.131.161.95 12 d
;IP route add 44.131.161.228/32  44.131.161.228 12 d
;IP route add 44.131.210.1/32  44.131.210.1 12 d
;IP route add 44.131.96.34/32 44.131.96.34 12 d
;
;  ARP <add | publish> <host> <ax25  | ether | netrom> <callsign | ether_addr>
;================================================================================
arp add 192.168.1.254 ether 00:E0:5D:01:07:6D              ;NIC
arp add 44.131.244.1 ax25 GB7CIP-12
;arp add 44.131.210.2 ax25 G7VJA-5

I believe the route add lines below yours were later removed as the stations were no longer active.
avatar
g4mki

Posts : 282
Join date : 2015-12-02
Age : 74
Location : Herne Bay, Kent

View user profile http://dbray.no-ip.org:83/index.php

Back to top Go down

Re: Xrouter - XR32

Post by g7vja on Mon Dec 28, 2015 10:07 am

Hi Duncan
According to Paula's website the linux xr32 Iproute.sys
is empty apart from the one line of text
IP ROUTE DEFAULT 0 * w
i confuse myself with the Iproute.sys
avatar
g7vja

Posts : 231
Join date : 2015-12-02
Age : 68
Location : Hartland Devon

View user profile http://www.g7vja.co.uk

Back to top Go down

Re: Xrouter - XR32

Post by g4mki on Mon Dec 28, 2015 10:10 am

Kenny,
I did struggle with some of Paula's notes!
I couldn't have produced a working router without your help.
avatar
g4mki

Posts : 282
Join date : 2015-12-02
Age : 74
Location : Herne Bay, Kent

View user profile http://dbray.no-ip.org:83/index.php

Back to top Go down

Re: Xrouter - XR32

Post by g4mki on Wed Dec 30, 2015 9:43 am

Hi Kenny,
One of the reasons I made my XP Pro machine dual boot was to run xr32 in Linux. I ran into exactly the same problem. From memory, Dick down in South Africa makes the setup sound so simple, but I could not get it to work. Kept asking for the windows driver which it isn't supposed to need in Linux.
If you do get it running I could do with some pointers!
I also tried to setup Uronode on the pi, but concluded that it was beyond my capability at the moment, so I am stuck with the xp home version on a very old computer which is already well past its sell by date.
avatar
g4mki

Posts : 282
Join date : 2015-12-02
Age : 74
Location : Herne Bay, Kent

View user profile http://dbray.no-ip.org:83/index.php

Back to top Go down

Re: Xrouter - XR32

Post by g7vja on Wed Dec 30, 2015 4:23 pm

Hello Duncan
My G7VJA-5 xr32 is running on Linux Mint v17.2 and links with your G4MKI-8 BPQ
it also links to my GB7COW-5 xr32 & GB7COW-3 Bpq
all the RF is done by GB7COW-5 xrouter
i can email my config for you to look over and edit to suit your needs.
G7VJA : HART should be in your BPQ node list

i also tried Uronode but gave up trying,found it too involved to setup.
plus very little help by those who use it.
avatar
g7vja

Posts : 231
Join date : 2015-12-02
Age : 68
Location : Hartland Devon

View user profile http://www.g7vja.co.uk

Back to top Go down

Re: Xrouter - XR32

Post by g4mki on Wed Dec 30, 2015 4:39 pm

Thanks Kenny,
That would be very helpful....
avatar
g4mki

Posts : 282
Join date : 2015-12-02
Age : 74
Location : Herne Bay, Kent

View user profile http://dbray.no-ip.org:83/index.php

Back to top Go down

Re: Xrouter - XR32

Post by g7vja on Wed Dec 30, 2015 4:59 pm

G7VJA-5 XR32 on Linux Mint 17.2

avatar
g7vja

Posts : 231
Join date : 2015-12-02
Age : 68
Location : Hartland Devon

View user profile http://www.g7vja.co.uk

Back to top Go down

Re: Xrouter - XR32

Post by g4mki on Wed Dec 30, 2015 5:27 pm

Hi Kenny,
I like the pic! Very Happy
avatar
g4mki

Posts : 282
Join date : 2015-12-02
Age : 74
Location : Herne Bay, Kent

View user profile http://dbray.no-ip.org:83/index.php

Back to top Go down

Re: Xrouter - XR32

Post by g7vja on Wed Dec 30, 2015 6:35 pm

Right click on the picture
save as
i will email you a zip of my Linux xr32 files
use your iproute.sys as you have it now.
just edit the config.
no dummy port required
port 99 must stay in the config.
you must have Wine installed on linux as well
if i can help with the setup just holla

my g7vja-5 xr32 pages should be working,
let me know if they do not.
i am using the xr32 built http for this set up not Apache.
http://gb7cow.dyndns.org:86
avatar
g7vja

Posts : 231
Join date : 2015-12-02
Age : 68
Location : Hartland Devon

View user profile http://www.g7vja.co.uk

Back to top Go down

Re: Xrouter - XR32

Post by g4mki on Wed Dec 30, 2015 7:05 pm

thanks Kenny,
I am looking forward to having a play Very Happy Very Happy Very Happy Very Happy
avatar
g4mki

Posts : 282
Join date : 2015-12-02
Age : 74
Location : Herne Bay, Kent

View user profile http://dbray.no-ip.org:83/index.php

Back to top Go down

Re: Xrouter - XR32

Post by g7vja on Fri Jan 01, 2016 2:45 am

Hi Duncan
Here is a working sample from my  linux xr32,you should be able to use this one in your config
all i have done is change the ip address, this will use port 93
at the moment my g7vja-5 xr32 links with your Bpq port 10098 which
does not seem to do a lot.
i would like to link my xr32 to your xr32 when you get the linux working.
Paula G8PZT is working on a LinXR version,but no date set for any release

PORT=26
      ID=AXUDP Link with G7VJA
      INTERFACENUM=14
      IPADDRESS=44.131.210.2
      IPLINK=80.176.146.86
      MAXHOPS=3        
      CFLAGS=11
      QUALITY=196
      PACLEN=236
      MHEARD=5
      FRACK=5000
ENDPORT
avatar
g7vja

Posts : 231
Join date : 2015-12-02
Age : 68
Location : Hartland Devon

View user profile http://www.g7vja.co.uk

Back to top Go down

Re: Xrouter - XR32

Post by g4mki on Fri Jan 01, 2016 10:28 am

Hi Kenny,
Happy New Year! Very Happy
Thanks for the IPLINK info. I have been a busy boy.
I setup xr32 in Ubuntu, and whilst I was setting up the PORTS, I noticed that the IPLINK address I was using was 192.168.0.249...that can't be right I said to myself!.
This time around, with Ubuntu, I followed Dick's info, removed all the interface/ports info except interface/port 99, changed iproute.sys to the single line IP ROUTE DEFAULT 0 * w and started xr32. Initially, I got a black screen and error report (10046, or similar). I then hashed out my own ipaddress in xrouter.cfg and tried again, and voila xr32 loaded. Progress at last.
The error report I suspect points to an ip problem, yet to be resolved.
I have now added my complete iproute.sys and some ports..my AGW port is working. When I unhash my ipaddress in xrouter.cfg the program still crashes.
I need to investigate further.
The next surprise....After rebooting to WinXP Pro, I loaded the win driver, started xr32 and it started up! Progress!!!
Obviously I will need to close down xr32 on my old pc and reassign all my router ports to get it all working properly.
It looks as though I may end up with xr32 working in XP Pro and Ubuntu
avatar
g4mki

Posts : 282
Join date : 2015-12-02
Age : 74
Location : Herne Bay, Kent

View user profile http://dbray.no-ip.org:83/index.php

Back to top Go down

Re: Xrouter - XR32

Post by g4mki on Fri Jan 01, 2016 11:52 pm

My link to HART is now working using the AXUDP port values you sent.
It was originally an AVIP port.( On XP Home)
avatar
g4mki

Posts : 282
Join date : 2015-12-02
Age : 74
Location : Herne Bay, Kent

View user profile http://dbray.no-ip.org:83/index.php

Back to top Go down

Re: Xrouter - XR32

Post by g7vja on Sat Jan 02, 2016 10:25 am

Hi Duncan
I seem to have lost my XR32 link too g4mki-8 Bpq
what SSID will you use for xr32 ??
5 is default


avatar
g7vja

Posts : 231
Join date : 2015-12-02
Age : 68
Location : Hartland Devon

View user profile http://www.g7vja.co.uk

Back to top Go down

Re: Xrouter - XR32

Post by g4mki on Sat Jan 02, 2016 12:20 pm

Kenny,
G4MKI-5 (SSID=5)
Yesterday I removed UDP 10098 which was the BPQ link to you..I will put it back. (You suggested it with the AXIP>AXUDP port change).

Something strange in your iproute.sys:

IP route add 192.168.0.1/32 192.168.0.1 12d
and:
IP route default 12 192.168.0.1 d

My understanding is that 12 d means port12 datagram, where port 12 was the Ethernet port in the windows version of xr32
There is no port 12 in your xrouter.cfg

Should 12 be at the beginning of the route default line for linux?
avatar
g4mki

Posts : 282
Join date : 2015-12-02
Age : 74
Location : Herne Bay, Kent

View user profile http://dbray.no-ip.org:83/index.php

Back to top Go down

Re: Xrouter - XR32

Post by g7vja on Sat Jan 02, 2016 1:08 pm

Soory Duncan
You are right about 12 d is only for the windows version
i put the wrong iproute.sys in the zip
this is the one i am using (below) for linux.

; ROUTE <default> <portnum> [<gateway> [<mode>] ]
; ==============================================
IP ROUTE DEFAULT 0 * w
;
avatar
g7vja

Posts : 231
Join date : 2015-12-02
Age : 68
Location : Hartland Devon

View user profile http://www.g7vja.co.uk

Back to top Go down

Re: Xrouter - XR32

Post by g4mki on Sat Jan 02, 2016 2:13 pm

Thanks Kenny
avatar
g4mki

Posts : 282
Join date : 2015-12-02
Age : 74
Location : Herne Bay, Kent

View user profile http://dbray.no-ip.org:83/index.php

Back to top Go down

Re: Xrouter - XR32

Post by g7vja on Sat Jan 02, 2016 4:57 pm

Hello Duncan
not sure how far you have got with the xr32 config.
what i was going to suggest to you is, start with port 99 only
hash out all the others for now
see if xr32 will load without errors being reported.
then we can work on the other ports as we go along.

also how are you starting linux xr32
what commands are you using
avatar
g7vja

Posts : 231
Join date : 2015-12-02
Age : 68
Location : Hartland Devon

View user profile http://www.g7vja.co.uk

Back to top Go down

Re: Xrouter - XR32

Post by g4mki on Sat Jan 02, 2016 5:42 pm

Hi Kenny,
I have already done that, and the problem persists, as soon as I unhash my ipaddress I get an error report.

I am wondering if Ubuntu 15.04 64 bit is the right platform for xr32.
Earlier versions upto 12.04 have reported success.

The rest of xrouter.cfg loads except my port 20 (AXUDP Link to G7VJA-5)

I will try a cut and paste of my xrouter.cfg and iproute.sys. files

I can't run xr32 on a Raspberry Pi, it wont support Wine...it needs a 'proper' processor.

I can't understand why, with my ipaddress and port 20 hashed out, xr32 boots ok and port 99 defaults to G7JVA-5.when there is no reference to  G7VJA-5 in either of my config files. Where on earth is it coming from?
Port 24 to GB7CIP-5 does not appear to load..it is not on the Nodes page
avatar
g4mki

Posts : 282
Join date : 2015-12-02
Age : 74
Location : Herne Bay, Kent

View user profile http://dbray.no-ip.org:83/index.php

Back to top Go down

Re: Xrouter - XR32

Post by g4mki on Sat Jan 02, 2016 6:02 pm

Kenny,
My iproute.sys:

; G4MKI-5 IPROUTE.SYS         Last modified: 27-Dec-15  G7VJA
; <mode> d       Datagram (use on very good quality links only).
;               v       Virtual circuit (better for links with retries).
;               n       Netrom (for "tunnelling" through netrom-only networks).
;               e       Encapsulated (e.g. ham IP carried by Internet IP).
;               w       Route everything via Linux.
;
; ROUTE    <default>   <portnum> [<gateway>  [<mode>] ]
; ==============================================
IP ROUTE   DEFAULT   0  *  w
avatar
g4mki

Posts : 282
Join date : 2015-12-02
Age : 74
Location : Herne Bay, Kent

View user profile http://dbray.no-ip.org:83/index.php

Back to top Go down

Re: Xrouter - XR32

Post by g4mki on Sat Jan 02, 2016 6:04 pm

Kenny,
My xrouter.cfg:

; XROUTER.CFG  Configuration file for G4MKI-5 Xrouter version 2.01o
;=======================================================================
; XR32 Router GLOBAL PARAMATERS.
;=======================================================================
#
TELNETPORT=6301 ; Default is 23.  ('0' disables TELNET).
;FTPPORT=0 ; Default is 21.  ('0' disables FTP)./
HTTPPORT=86 ; Default is 80.  ('0' disables HTTP).
HTTPROOT=/HOME/XR32/HTTP
;;HTTPROOT=/VAR/WWW
;CHATPORT=3600 ; Default is 3600.('0' disables CHAT).
ROWS=40                ;Default is 25.  (Rows on XR32 console).
SORTBYCALL=1 ; Default is  0.  (Sort Node-list by callsign).
#
; =======================================================================
; AX25 Level-2 GLOBAL PARAMATERS.
; =======================================================================
#
T3=180 ; Link check interval in secs (180 is 3 minutes).
IDLETIME=900 ; Idle link shutdown timer in secs (900)
IDINTERVAL=15 ; Minutes between ID broadcasts (0 is disable)
PACLEN=220 ; Global paclen (default is 120)
MAXLINKS=30 ; Max. simultaneous L2 links (default is 0)
#
; =======================================================================
; Station Identification:
; =======================================================================
#
NODECALL=G4MKI-5
#
; =======================================================================
; Station Alias:
; =======================================================================
#
NODEALIAS=HBXR32
#
; =======================================================================
; Station AprsCall:
; =======================================================================
#
;APRSCALL=MB7UEK-2
#
; =======================================================================
; Station ConsoleCall:
; =======================================================================
#
CONSOLECALL=G4MKI-5
#
; =======================================================================
; Station IpAddress:
; =======================================================================
#
IPADDRESS=44.131.255.164
#
#
; =======================================================================
; Station DNS:
; =======================================================================
#
DNS=192.168.1.254
#
; =======================================================================
; Station Domain:
; =======================================================================
#
DOMAIN=ampr.org
#
; =======================================================================
; Station Hostname:
; =======================================================================
#
HOSTNAME=g4mki.ampr.org
; =======================================================================
; Station ChatCall:
; =======================================================================
#
CHATCALL=G4MKI-9
#
; =======================================================================
; Station Chat Alias:
; =======================================================================
#
CHATALIAS=HBCHT
#
; =======================================================================
; Station ChatLinks:
; =======================================================================
#
;CHATLINKS=G8PZT-8,VE2PKT-8,VK2DOT-8,VE3UIL-8,GB7COW-8
#
; =======================================================================
; Station ChatQual:
; =======================================================================
#
CHATQUAL=220
#
; =======================================================================
; Station PmsCall:
; =======================================================================
#
PMSCALL=G4MKI-6
;
PMSALIAS=HBPMS
;
PMSQUAL=220
;
#
; =======================================================================
; Station location (32 chars max).
; =======================================================================
#
QTH=Herne Bay, Kent [UK] JO01ni
#
; =======================================================================
; Station Igate.
; =======================================================================
#
;IGATE=0
#
; =======================================================================
; Station IPTTL (Time to Live).
; =======================================================================
#
IPTTL=100
#
#=======================================================================
# Colour Settings:Permissible Colours are
# Dark: BLACK, NAVY, GREEN, CYAN, RED, MAGENTA, ORANGE, SILVER
# Light: GREY,  BLUE, LIME, TURQUOISE, PINK, CERISE, YELLOW, WHITE
#=======================================================================
#
TopWinBgColor=WHITE # Top status bar background colour
TopWinTxtColor=BLACK # Top status bar text colour

MidWinBgColor=BLACK # Main window background colour
MidWinTxtColor=YELLOW # Main window text colour
CmdWinBgColor=NAVY # Command line background colour
CmdWinTxtColor=YELLOW # Command line text colour
BotWinBgColor=WHITE # Bottom menu bar background colour
BotWinTxtColor=NAVY # Bottom menu bar text colour
TxColor=LIME # Colour for displaying outgoing (transmitted) data
RxColor=YELLOW # Colour for displaying incoming (received) data
EchoColor=WHITE        # Colour used for echoing Sysop's commands to main window.
#
#----------------------------------------------------------------------------
#
CONSOLE=3
TOPWINBGCOLOR=SILVER
MIDWINBGCOLOR=NAVY
MIDWINTXTCOLOR=WHITE
CMDWINBGCOLOR=GREEN
BOTWINBGCOLOR=SILVER
       CONSOLECALL=G7VJA-5
TXCOLOR=YELLOW
RXCOLOR=WHITE
ENDCONSOLE
#
; =======================================================================
; Station Connect Text
; =======================================================================
#
CTEXT

=======================================================================
 Type ? for a list of commands  that  may  be  used  on  this  Router.
=======================================================================

Welcome To The G4MKI:HBXR32 Xrouter Node (Ubuntu)

Please Type `?` For A List Of Available Commands.
Please Type `I` For A List Of Available Commands.
***
#
; =======================================================================
; Station Infotext
; =======================================================================
#
INFOTEXT
G4MKI-5 AX25/IP Router]
=====================================================================
This system may only be accessed by Radio Amateurs using their real
callsigns  and in accordance  with  their country's  jurisdiction's
licensing conditions.  All connections to this system are recorded.
System is using XR32 v201o,Ubuntu & Wine
Have fun....  73, Duncan G4MKI
(B)ye       - Disconnects From Node_Router
(C)onnect   - To Connect To A Netrom Node - Use C Nodecall
            - To Connect To A AX25 Station - Type C (Port) Callsign
(MH)eard    - Stations Recently Heard On Node Ports
(N)odes     - Lists Known Nodes
(P)orts     - Ports Description On This Node
(R)outes    - Lists Routes To Neighbouring Nodes
(U)sers     - Lists Currently Connected Users

Type ? for a list of commands  that  may  be  used  on  this  Router.

--

***
#
; =======================================================================
; Station IDtext.
; =======================================================================
#
IDTEXT
5121.46N/00105.87E# G4MKI-5:HBXR32, [44.131.255.164], Chat=G4MKI-9:HBCHT
***
#
; =======================================================================
; Station CTFlags.
; =======================================================================
#
CTFLAGS=9 ; Default is 9 (Node/port alias and TCP only)
#
; =======================================================================
; Station NUMCONSOLES.
; =======================================================================
#
NUMCONSOLES=3 ; Virtual consoles (max is 5).
#
; =======================================================================
; Station Log.
; =======================================================================
#
LOG=0     ;LOG is 0 disables, LOG is 1 will log all connects,
#
; =======================================================================
; Station SessLimit.
; =======================================================================
#
SESSLIMIT=255      ;Max setting is default '255'
#
; =======================================================================
; Station DXFlags.
; =======================================================================
#
DXFLAGS=1   ;0 Show directly heard stations,1 Show digipeated stations
#
; =======================================================================
; Station ENABLE_LINKED.
; =======================================================================
#
ENABLE_LINKED=Y  Options,Y ,A ,Default is N
#
;=======================================================================
; Station L4 PARAMETERS
;=======================================================================
#
L4TIMEOUT=90
#
L4DELAY=10
#
L4WINDOW=4
#
L4RETRIES=3
#
;=======================================================================
; Station L3 PARAMETERS
;=======================================================================
#
OBSINIT=5
#
OBSMIN=3
#
NODESINTERVAL=30
#
L3TTL=25
#
HIDENODES=1
#
MINQUAL=10
#
;=======================================================================
; Station QUALADJUST
;=======================================================================
#
;QUALADJUST default 120  ;Syntax: QUALADJUST <call | 'default'> <0-255>
;QUALADJUST G*  200
;QUALADJUST 2E* 100
;QUALADJUST M*  100
;QUALADJUST N*  150
;QUALADJUST VE* 200
;QUALADJUST VK* 200
;QUALADJUST ZL* 200
;QUALADJUST ZU* 250
;QUALADJUST ZR* 250
;QUALADJUST ZS* 250
#
;=======================================================================
; Station MaxNodes.
;=======================================================================
#
MAXNODES=200 ; Maximum nodes to include in table (default 200)
#
MAXTT=5000
#
;=======================================================================
; Station MaxHops
;=======================================================================
#
MAXHOPS=2
#
; =======================================================================
; Interface definitions - These MUST come before any port definitions
; =======================================================================
#
#--------------------------------------
#    
INTERFACE=99
TYPE=LOOPBACK
ID=Loopback Interface
PROTOCOL=KISS
MTU=256
ENDINTERFACE
#
#---------------------------------------
#
INTERFACE=2
       TYPE=AGW
       IOADDR=192.168.1.13
       INTNUM=8001
       MTU=256
ENDINTERFACE
#
#---------------------------------------
#
INTERFACE=14
       TYPE=AXUDP
       MTU=256
ENDINTERFACE
#
#===========================================================================
# Port definitions. Each one begins with PORT n and ends with ENDPORT
#===========================================================================
#
PORT=2
       ID=AGW Port 1 MB7UEK (RX only)
       INTERFACENUM=2
       MHEARD=10
       CHANNEL=A
ENDPORT
#
#=======================================================================
# PROXY'S
#=======================================================================
#
;PROXY=GB7COW  COWBBS 255 192.168.0.9 6300
;PROXY=GB7HTL  MYDXC 255 192.168.0.7 9000
#
#=======================================================================
#
PORT=20
       ID=AXUDP Link with G7VJA-5
       INTERFACENUM=14
       IPADDRESS=44.131.210.2
       IPLINK=80.176.146.86
       MAXHOPS=3
       CFLAGS=11
       QUALITY=196
       PACLEN=236
       MHEARD=5
       FRACK=5000
ENDPORT
#
;-----------------------------------------------------------------------
#
PORT=24
      ID=AXUDP Link with GB7CIP-5
      INTERFACENUM=14
      IPLINK=62.49.17.234
      UDPLOCAL=10092
      UDPREMOTE=10092
      FRACK=5000
      RESPTIME=200
      MAXHOPS=3        
      CFLAGS=15
      QUALITY=192
      PACLEN=236
      MHEARD=15
      IPADDRESS=44.131.255.164   ;g4mki.ampr.org
ENDPORT
#
;-----------------------------------------------------------------------
#
PORT=99
ID=Internal   - KISS     Loopback.
INTERFACENUM=99         ; Loopback, KISS
MHEARD=5
QUALITY=220
ENDPORT
#
#===================================================================
#       Sysop-defined commands:
#===================================================================
#
;COMMAND=NDEVON    C 21 GB7COW-5   S
;COMMAND=G4MKI     C 22 G4MKI-8   S
;COMMAND=DEVON     C 26 GB7COW-3   S
;COMMAND=WWCONV    tel 44.131.244.1 3600
;COMMAND=MYDXC     C 11 GB7HTL    S
;COMMAND=COWBBS    C 11 GB7COW    S
#
#===================================================================
avatar
g4mki

Posts : 282
Join date : 2015-12-02
Age : 74
Location : Herne Bay, Kent

View user profile http://dbray.no-ip.org:83/index.php

Back to top Go down

Re: Xrouter - XR32

Post by g4mki on Sat Jan 02, 2016 6:12 pm

I followed the insructions in here:

www.g8pzt.myby.co.uk/software/xr32/docs/xrubuntu.htm

[url=http://www.g8pzt.my.by.co.uk/software/xr32/docs/xrubuntu.htm]
avatar
g4mki

Posts : 282
Join date : 2015-12-02
Age : 74
Location : Herne Bay, Kent

View user profile http://dbray.no-ip.org:83/index.php

Back to top Go down

Re: Xrouter - XR32

Post by g7vja on Sat Jan 02, 2016 9:30 pm

Duncan
what error are you getting??

hash out all the ports except port 99
then try and run xr32
will it run with port 99 only
change these two lines to my static ip
#
PROXY=GB7COW  COWBBS 255 80.176.146.86 6300
PROXY=GB7HTL  MYDXC 255 80.176.146.86 9000
#

how are you starting the xr32 program??
avatar
g7vja

Posts : 231
Join date : 2015-12-02
Age : 68
Location : Hartland Devon

View user profile http://www.g7vja.co.uk

Back to top Go down

Re: Xrouter - XR32

Post by g4mki on Sun Jan 03, 2016 12:58 am

Kenny,
By right clicking on xr32.exe in /home/xr32 in the file browser and in the pop-up window 'open with' and left click on 'wine windows loader'...

Just to bring you upto speed I have replaced Ubuntu with the 64bit version of linuxmint 17.3 'Rosa'. So my dual boot computer is now Windows XP Pro/LinuxMint.

It is a completely 'clean' system apart from installing Wine and creating a folder xr32 in  /home e.g /home/xr32. I have copied into that all the files from an old copy of xr32 which I had stored on a USB memory stick, plus updated versions of xrouter.cfg and iproute.sys . I have done an 'ls-l' on the contents of the directory to determine ownership (all root) and sudo chmod +x on xr32.exe.

I am getting similar, though not exactly the same errors as I have already reported with Ubuntu.

If I comment out my ipaddress and port 20 (AXUDP Link to G7VJA) xr32 boots and I can connect to HBXR32 using c 99 HBXR32. I cannot do anything else.

The error report relating to my ipaddress:
XROUTER.CFG: ERROR in line 403 - Proto 1 socket creation error 10044

The error relating to port 20:
XROUTER.CFG: ERROR in line 403 - Port 20 AXUDP initialisation error 20013

I am not getting an error report from Port 24 (AXUDP link to GB7CIP-5

Note: the line number is the same for both error reports even though the problems appear near the top and bottom of the config file.

If my ipaddress and port 20 are commented out, xr32 runs on port 99. So the first problem to resolve revovlves around IPADDRESS=44.131.255.164, that is the crux.
avatar
g4mki

Posts : 282
Join date : 2015-12-02
Age : 74
Location : Herne Bay, Kent

View user profile http://dbray.no-ip.org:83/index.php

Back to top Go down

Re: Xrouter - XR32

Post by Sponsored content


Sponsored content


Back to top Go down

Page 1 of 5 1, 2, 3, 4, 5  Next

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum